1 /*
2 * Copyright (c) 2000-2020 Apple, Inc. All rights reserved.
3 *
4 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
5 *
6 * This file contains Original Code and/or Modifications of Original Code
7 * as defined in and that are subject to the Apple Public Source License
8 * Version 2.0 (the 'License'). You may not use this file except in
9 * compliance with the License. The rights granted to you under the License
10 * may not be used to create, or enable the creation or redistribution of,
11 * unlawful or unlicensed copies of an Apple operating system, or to
12 * circumvent, violate, or enable the circumvention or violation of, any
13 * terms of an Apple operating system software license agreement.
14 *
15 * Please obtain a copy of the License at
16 * http://www.opensource.apple.com/apsl/ and read it before using this file.
17 *
18 * The Original Code and all software distributed under the License are
19 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23 * Please see the License for the specific language governing rights and
24 * limitations under the License.
25 *
26 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
27 */
28
29 #ifdef __x86_64__
30 #include <i386/mp.h>
31 #include <i386/cpu_data.h>
32 #include <i386/bit_routines.h>
33 #include <i386/machine_routines.h>
34 #include <i386/misc_protos.h>
35 #include <i386/serial_io.h>
36 #endif /* __x86_64__ */
37
38 #include <machine/machine_cpu.h>
39 #include <libkern/OSAtomic.h>
40 #include <vm/vm_kern_xnu.h>
41 #include <vm/vm_map.h>
42 #include <console/video_console.h>
43 #include <console/serial_protos.h>
44 #include <kern/startup.h>
45 #include <kern/thread.h>
46 #include <kern/cpu_data.h>
47 #include <kern/sched_prim.h>
48 #include <libkern/section_keywords.h>
49
50 #if __arm64__
51 #include <machine/machine_routines.h>
52 #include <arm/cpu_data_internal.h>
53 #endif
54
55 #ifdef CONFIG_XNUPOST
56 #include <tests/xnupost.h>
57 kern_return_t console_serial_test(void);
58 kern_return_t console_serial_parallel_log_tests(void);
59 #endif
60
61 /* Structure representing the console ring buffer. */
62 static struct {
63 /* The ring buffer backing store. */
64 char *buffer;
65
66 /* The total length of the ring buffer. */
67 int len;
68
69 /**
70 * The number of characters that have been written into the buffer that need
71 * to be drained.
72 */
73 int used;
74
75 /**
76 * Number of reserved regions in the buffer. These are regions that are
77 * currently being written into by various CPUs. We use this as a way of
78 * determining when it's safe to drain the buffer.
79 */
80 int nreserved;
81
82 /* The location in the buffer thats written to next. */
83 char *write_ptr;
84
85 /* The location in the buffer that will be drained next. */
86 char *read_ptr;
87
88 /* Synchronizes the flushing of the ring buffer to hardware */
89 lck_mtx_t flush_lock;
90
91 /**
92 * Synchronizes reserving space in the ring buffer and ensures that only
93 * completed writes are flushed.
94 */
95 lck_ticket_t write_lock;
96 } console_ring;
97
98 /**
99 * We don't dedicate any buffer space to specific CPUs, but this value is used
100 * to scale the size of the console buffer by the number of CPUs.
101 *
102 * How many bytes-per-cpu to allocate in the console ring buffer. Also affects
103 * the maximum number of bytes a single console thread can drain.
104 */
105 #define CPU_CONS_BUF_SIZE 256
106
107 /* Scale the size of the console ring buffer by the number of CPUs. */
108 #define KERN_CONSOLE_RING_SIZE vm_map_round_page(CPU_CONS_BUF_SIZE * (MAX_CPUS + 1), PAGE_SIZE - 1)
109
110 #define MAX_FLUSH_SIZE_LOCK_HELD 16
111 #define MAX_TOTAL_FLUSH_SIZE (MAX(2, MAX_CPUS) * CPU_CONS_BUF_SIZE)
112
113 extern int serial_getc(void);
114 extern void serial_putc_options(char, bool);
115
116 #if DEBUG || DEVELOPMENT
117 TUNABLE(bool, allow_printf_from_interrupts_disabled_context, "nointr_consio", false);
118 #else
119 #define allow_printf_from_interrupts_disabled_context false
120 #endif
121
122 SECURITY_READ_ONLY_EARLY(struct console_ops) cons_ops[] = {
123 {
124 .putc = serial_putc_options, .getc = _serial_getc,
125 },
126 {
127 .putc = vcputc_options, .getc = _vcgetc,
128 },
129 };
130
131 SECURITY_READ_ONLY_EARLY(uint32_t) nconsops = (sizeof cons_ops / sizeof cons_ops[0]);
132
133 #if __x86_64__
134 uint32_t cons_ops_index = VC_CONS_OPS;
135 #else
136 SECURITY_READ_ONLY_LATE(uint32_t) cons_ops_index = VC_CONS_OPS;
137 #endif
138
139 LCK_GRP_DECLARE(console_lck_grp, "console");
140
141 /* If the NMI string is entered into the console, the system will enter the debugger. */
142 #define NMI_STRING_SIZE 32
143 char nmi_string[NMI_STRING_SIZE] = "afDIGHr84A84jh19Kphgp428DNPdnapq";
144 static int nmi_counter = 0;
145
146 /**
147 * This is used to prevent console output from going through the console ring
148 * buffer synchronization in cases where that could cause issues (e.g., during
149 * panics/stackshots and going down for sleep).
150 */
151 static bool console_suspended = false;
152
153 /**
154 * Controls console output for underlying serial or video console.
155 * To be used only by core console and init accessors.
156 */
157 int disableConsoleOutput;
158
159 /**
160 * Enforce policies around when console I/O is allowed. Most importantly about
161 * not performing console I/O while interrupts are disabled (which can cause
162 * serious latency issues).
163 *
164 * @return True if console I/O should be allowed, false otherwise.
165 */
166 static inline bool
console_io_allowed(void)167 console_io_allowed(void)
168 {
169 if (!allow_printf_from_interrupts_disabled_context &&
170 !console_suspended &&
171 startup_phase >= STARTUP_SUB_EARLY_BOOT &&
172 !ml_get_interrupts_enabled()) {
173 #if defined(__arm64__) || DEBUG || DEVELOPMENT
174 panic("Console I/O from interrupt-disabled context");
175 #else
176 return false;
177 #endif
178 }
179
180 return true;
181 }
182
183 /**
184 * Initialize the console ring buffer and console lock. It's still possible to
185 * call console_write() before initializing the ring buffer. In that case the
186 * data will get outputted directly to the underlying serial/video console
187 * without synchronization.
188 *
189 * This function is also safe to call multiple times. Any call after the first
190 * will return early without doing anything.
191 */
192 void
console_init(void)193 console_init(void)
194 {
195 if (console_ring.len != 0) {
196 return;
197 }
198
199 kmem_alloc(kernel_map, (vm_offset_t *)&console_ring.buffer,
200 KERN_CONSOLE_RING_SIZE + ptoa(2), KMA_NOFAIL | KMA_PERMANENT |
201 KMA_KOBJECT | KMA_PERMANENT | KMA_GUARD_FIRST | KMA_GUARD_LAST |
202 KMA_ZERO | KMA_DATA, VM_KERN_MEMORY_OSFMK);
203
204 console_ring.buffer += PAGE_SIZE; /* Skip past the first guard page. */
205 console_ring.len = KERN_CONSOLE_RING_SIZE;
206 console_ring.used = 0;
207 console_ring.nreserved = 0;
208 console_ring.read_ptr = console_ring.buffer;
209 console_ring.write_ptr = console_ring.buffer;
210
211 lck_mtx_init(&console_ring.flush_lock, &console_lck_grp, LCK_ATTR_NULL);
212 lck_ticket_init(&console_ring.write_lock, &console_lck_grp);
213 }
214
215 /**
216 * Returns true when the console has already been initialized.
217 */
218 static inline bool
is_console_initialized(void)219 is_console_initialized(void)
220 {
221 return console_ring.len == KERN_CONSOLE_RING_SIZE;
222 }
223
224 /**
225 * Return the index to the currently selected console (serial/video). This is
226 * an index into the "cons_ops[]" array of function pointer structs.
227 */
228 static inline uint32_t
get_cons_ops_index(void)229 get_cons_ops_index(void)
230 {
231 uint32_t idx = cons_ops_index;
232
233 if (idx >= nconsops) {
234 panic("Bad cons_ops_index: %d", idx);
235 }
236
237 return idx;
238 }
239
240 /**
241 * Helper function for outputting a character to the underlying console
242 * (either video or serial) with the possibility of sleeping waiting for
243 * an interrupt indicating the console is ready.
244 *
245 * @note assumes console_ring.read lock is held if poll == false
246 *
247 * @param c The character to print.
248 * @param poll Whether or not this call should poll instead of going to sleep
249 * waiting for an interrupt when the hardware device isn't ready
250 */
251 static inline void
_cnputc(char c,bool poll)252 _cnputc(char c, bool poll)
253 {
254 bool in_debugger = (kernel_debugger_entry_count > 0);
255 const uint32_t idx = get_cons_ops_index();
256
257 poll = poll || in_debugger;
258
259 if (c == '\n') {
260 _cnputc('\r', poll);
261 }
262
263 cons_ops[idx].putc(c, poll);
264 }
265
266 /**
267 * Helper function for outputting characters directly to the underlying console
268 * (either video or serial).
269 *
270 * @note disableConsoleOutput is to be used only by core console and init accessors
271 * such as this function. Returns early if the serial output is disabled.
272 *
273 * @param c The array of characters to print.
274 * @param poll Whether or not this call should poll instead of going to sleep
275 * waiting for an interrupt when the hardware device isn't ready
276 * @param size The number of characters to print to the console.
277 */
278 static inline void
_cnputs(char * c,int size,bool poll)279 _cnputs(char *c, int size, bool poll)
280 {
281 if (disableConsoleOutput) {
282 return;
283 }
284
285 assert(c != NULL);
286
287 while (size-- > 0) {
288 _cnputc(*c, poll);
289 c++;
290 }
291 }
292
293 /**
294 * Attempt to reserve space for a number of characters in the console ring
295 * buffer. Space in the ring buffer must be reserved before new characters can
296 * be entered.
297 *
298 * Every call to this function should be paired with a corresponding call to
299 * console_ring_unreserve_space().
300 *
301 * @note If space is successfully reserved, this will disable preemption because
302 * otherwise, console_ring_try_empty() could take arbitrarily long.
303 *
304 * @param nchars The number of characters to reserve.
305 *
306 * @return If the wanted number of characters could not be reserved, then return
307 * NULL. Otherwise, return a pointer to the beginning of the reserved
308 * space.
309 */
310 static inline char*
console_ring_reserve_space(int nchars)311 console_ring_reserve_space(int nchars)
312 {
313 char *write_ptr = NULL;
314 lck_ticket_lock(&console_ring.write_lock, &console_lck_grp);
315 if ((console_ring.len - console_ring.used) >= nchars) {
316 console_ring.used += nchars;
317 mp_disable_preemption();
318 os_atomic_inc(&console_ring.nreserved, relaxed);
319
320 /* Return out the pointer to the beginning of the just reserved space. */
321 write_ptr = console_ring.write_ptr;
322
323 /* Move the console ring's write pointer to the beginning of the next free space. */
324 const ptrdiff_t write_index = console_ring.write_ptr - console_ring.buffer;
325 console_ring.write_ptr = console_ring.buffer + ((write_index + nchars) % console_ring.len);
326 }
327 lck_ticket_unlock(&console_ring.write_lock);
328 return write_ptr;
329 }
330
331 /**
332 * Decrement the number of reserved spaces in the console ring (now that the data
333 * has been written) and re-enable preemption.
334 *
335 * Every call to this function should be paired with a corresponding call to
336 * console_ring_reserve_space().
337 */
338 static inline void
console_ring_unreserve_space(void)339 console_ring_unreserve_space(void)
340 {
341 assert(console_ring.nreserved > 0);
342
343 os_atomic_dec(&console_ring.nreserved, relaxed);
344 mp_enable_preemption();
345 }
346
347 /**
348 * Write a single character into the console ring buffer and handle moving the
349 * write pointer circularly around the buffer.
350 *
351 * @note Space to write this character must have already been reserved using
352 * console_ring_reserve_space().
353 *
354 * @param write_ptr Pointer into the reserved space in the buffer to write the
355 * character. This pointer will get moved to the next valid
356 * location to write a character so the same pointer can be
357 * passed into subsequent calls to write multiple characters.
358 * @param ch The character to insert into the ring buffer.
359 */
360 static inline void
console_ring_put(char ** write_ptr,char ch)361 console_ring_put(char **write_ptr, char ch)
362 {
363 assert(console_ring.nreserved > 0);
364 **write_ptr = ch;
365 ++(*write_ptr);
366 if ((*write_ptr - console_ring.buffer) == console_ring.len) {
367 *write_ptr = console_ring.buffer;
368 }
369 }
370
371 /**
372 * Attempt to drain the console ring buffer if no other CPUs are already doing
373 * so.
374 *
375 * @param fail_fast If true, this function returns immediately instead of
376 * sleeping if the thread fails to acquire the console flush
377 * mutex.
378 *
379 * @note This function should not be called with preemption disabled.
380 *
381 * @note To prevent one CPU from holding the console lock for too long, only
382 * MAX_FLUSH_SIZE_LOCK_HELD number of characters can be drained at a time
383 * with the lock held. The lock will be dropped between each drain of size
384 * MAX_FLUSH_SIZE_LOCK_HELD to allow another CPU to grab the lock. If
385 * another CPU grabs the lock, then the original thread can stop draining
386 * and return instead of sleeping for the lock.
387 *
388 * @note To prevent one thread from being the drain thread for too long (presumably
389 * that thread has other things it wants to do besides draining serial), the
390 * total number of characters a single call to this function can drain is
391 * restricted to MAX_TOTAL_FLUSH_SIZE.
392 */
393 static void
console_ring_try_empty(bool fail_fast)394 console_ring_try_empty(bool fail_fast)
395 {
396 char flush_buf[MAX_FLUSH_SIZE_LOCK_HELD];
397
398 int nchars_out = 0;
399 int total_chars_out = 0;
400 int size_before_wrap = 0;
401 bool in_debugger = (kernel_debugger_entry_count > 0);
402
403 if (__improbable(!console_io_allowed()) || (!in_debugger && get_preemption_level() != 0)) {
404 return;
405 }
406
407 do {
408 if (__probable(!in_debugger) && fail_fast && !lck_mtx_try_lock(&console_ring.flush_lock)) {
409 return;
410 } else if (__probable(!in_debugger) && !fail_fast) {
411 lck_mtx_lock(&console_ring.flush_lock);
412 }
413
414 if (__probable(!in_debugger)) {
415 lck_ticket_lock(&console_ring.write_lock, &console_lck_grp);
416
417 /**
418 * If we've managed to grab the write lock, but there's still space
419 * reserved in the buffer, then other CPUs are actively writing into
420 * the ring, wait for them to finish.
421 */
422 while (os_atomic_load(&console_ring.nreserved, relaxed) > 0) {
423 cpu_pause();
424 }
425 }
426
427 /* Try small chunk at a time, so we allow writes from other cpus into the buffer. */
428 nchars_out = MIN(console_ring.used, (int)sizeof(flush_buf));
429
430 /* Account for data to be read before wrap around. */
431 size_before_wrap = (int)((console_ring.buffer + console_ring.len) - console_ring.read_ptr);
432 if (nchars_out > size_before_wrap) {
433 nchars_out = size_before_wrap;
434 }
435
436 /**
437 * Copy the characters to be drained into a separate flush buffer, and
438 * move the console read pointer to the next chunk of data that needs to
439 * be drained.
440 */
441 if (nchars_out > 0) {
442 memcpy(flush_buf, console_ring.read_ptr, nchars_out);
443 const ptrdiff_t read_index = console_ring.read_ptr - console_ring.buffer;
444 console_ring.read_ptr = console_ring.buffer + ((read_index + nchars_out) % console_ring.len);
445 console_ring.used -= nchars_out;
446 }
447
448 if (__probable(!in_debugger)) {
449 lck_ticket_unlock(&console_ring.write_lock);
450 }
451
452 /**
453 * Output characters to the underlying console (serial/video). We should
454 * only poll if the console is suspended.
455 */
456 if (nchars_out > 0) {
457 total_chars_out += nchars_out;
458 _cnputs(flush_buf, nchars_out, console_suspended);
459 }
460
461 if (__probable(!in_debugger)) {
462 lck_mtx_unlock(&console_ring.flush_lock);
463 }
464
465 /**
466 * Prevent this thread from sleeping on the lock again if another thread
467 * grabs it after we drop it.
468 */
469 fail_fast = true;
470
471 /*
472 * In case we end up being the console drain thread for far too long,
473 * break out. Except in panic/suspend cases where we should clear out
474 * the full buffer.
475 */
476 if (!console_suspended && (total_chars_out >= MAX_TOTAL_FLUSH_SIZE)) {
477 break;
478 }
479 } while (nchars_out > 0);
480 }
481
482 /**
483 * Notify the console subystem that all following console writes should skip
484 * synchronization and get outputted directly to the underlying console. This is
485 * important for cases like panic/stackshots and going down for sleep where
486 * assumptions about the state of the system could cause hangs or nested panics.
487 */
488 void
console_suspend()489 console_suspend()
490 {
491 console_suspended = true;
492 console_ring_try_empty(false);
493 }
494
495 /**
496 * Notify the console subsystem that it is now safe to use the console ring
497 * buffer synchronization when writing console data.
498 */
499 void
console_resume()500 console_resume()
501 {
502 console_suspended = false;
503 }
504
505 /**
506 * Write a string of characters to the underlying video or serial console in a
507 * synchronized manner. By synchronizing access to a global console buffer, this
508 * prevents the serial output from appearing interleaved to the end user when
509 * multiple CPUs are outputting to the console at the same time.
510 *
511 * @note It's safe to call this function even before the console buffer has been
512 * initialized. In that case, the data will be sent directly to the
513 * underlying console with no buffering. This is the same for when the
514 * console is suspended.
515 *
516 * @note disableConsoleOutput is to be used only by core console and init accessors
517 * such as this function. Returns early if the serial output is disabled and
518 * skips lock acquisition.
519 *
520 * @param str The string of characters to print.
521 * @param size The number of characters in `str` to print.
522 */
523 void
console_write(char * str,int size)524 console_write(char *str, int size)
525 {
526 if (disableConsoleOutput) {
527 return;
528 }
529
530 assert(str != NULL);
531
532 char *write_ptr = NULL;
533 int chunk_size = CPU_CONS_BUF_SIZE;
534 int i = 0;
535
536 if (__improbable(console_suspended || !is_console_initialized() || pmap_in_ppl())) {
537 /*
538 * Output directly to console in the following cases:
539 * 1. If this is early in boot before the console has been initialized.
540 * 2. If we're heading into suspend.
541 * 3. If we're in the kernel debugger for a panic/stackshot. If any of
542 * the other cores happened to halt while holding any of the console
543 * locks, attempting to use the normal path will result in sadness.
544 * 4. If we're in the PPL. As we synchronize the ring buffer with a
545 * mutex and preemption is disabled in the PPL, any writes must go
546 * directly to the hardware device.
547 */
548 _cnputs(str, size, true);
549 return;
550 } else if (__improbable(!console_io_allowed())) {
551 return;
552 }
553
554 while (size > 0) {
555 /**
556 * Restrict the maximum number of characters that can be reserved at
557 * once. This helps prevent one CPU from reserving too much and starving
558 * out the other CPUs.
559 */
560 if (size < chunk_size) {
561 chunk_size = size;
562 }
563
564 /**
565 * Attempt to reserve space in the ring buffer and if that fails, then
566 * keep attempting to drain the ring buffer until there's enough space.
567 * We can't flush the serial console with preemption disabled so return
568 * early to drop the message in that case.
569 */
570 while ((write_ptr = console_ring_reserve_space(chunk_size)) == NULL) {
571 if (get_preemption_level() != 0) {
572 return;
573 }
574
575 console_ring_try_empty(false);
576 }
577
578 for (i = 0; i < chunk_size; i++) {
579 console_ring_put(&write_ptr, str[i]);
580 }
581
582 console_ring_unreserve_space();
583 str = &str[i];
584 size -= chunk_size;
585 }
586
587 /* Do good faith flush if preemption is not disabled */
588 if (get_preemption_level() == 0) {
589 console_ring_try_empty(true);
590 }
591 }
592
593 /**
594 * Output a character directly to the underlying console (either video or serial).
595 * This directly bypasses the console serial buffer (as provided by console_write())
596 * and all of the synchronization that provides.
597 *
598 * @note This function can cause serial data to get printed interleaved if being
599 * called on multiple CPUs at the same time. Only use this function if
600 * there's a specific reason why this serial data can't get synchronized
601 * through the console buffer.
602 *
603 * @note disableConsoleOutput is to be used only by core console and init accessors
604 * such as this function. Returns early if the serial output is disabled.
605 *
606 * @param c The character to print.
607 */
608 void
console_write_unbuffered(char c)609 console_write_unbuffered(char c)
610 {
611 if (disableConsoleOutput) {
612 return;
613 }
614
615 _cnputc(c, true);
616 }
617
618 /**
619 * Write a single character to the selected console (video or serial).
620 *
621 * @param c The character to print.
622 */
623 void
console_write_char(char c)624 console_write_char(char c)
625 {
626 console_write(&c, 1);
627 }
628
629 /**
630 * Wrapper around the platform-dependent serial input method which handles
631 * waiting for a new character and checking for the NMI string.
632 *
633 * @param wait True if this function should block until a character appears.
634 *
635 * @return The character if one was read, -1 otherwise.
636 */
637 int
_serial_getc(bool wait)638 _serial_getc(bool wait)
639 {
640 int c = -1;
641
642 do {
643 c = serial_getc();
644 } while (wait && c < 0);
645
646 /* Check for the NMI string. */
647 if (c == nmi_string[nmi_counter]) {
648 nmi_counter++;
649 if (nmi_counter == NMI_STRING_SIZE) {
650 /* We've got the NMI string, now do an NMI. */
651 Debugger("Automatic NMI");
652 nmi_counter = 0;
653 return '\n';
654 }
655 } else if (c != -1) {
656 nmi_counter = 0;
657 }
658
659 return c;
660 }
661
662 /**
663 * Typically the video console doesn't support input, but we call into the
664 * pexpert to give each platform an opportunity to provide console input through
665 * alternative methods if it so desires.
666 *
667 * Usually a platform will either not provide any input, or will grab input from
668 * the serial driver.
669 *
670 * @return The character if one was read, or -1 otherwise.
671 */
672 int
_vcgetc(__unused bool wait)673 _vcgetc(__unused bool wait)
674 {
675 char c;
676
677 if (0 == PE_stub_poll_input(0, &c)) {
678 return c;
679 } else {
680 return -1;
681 }
682 }
683
684 /**
685 * Block until a character is available from the console and return it.
686 *
687 * @return The character retrieved from the console.
688 */
689 int
console_read_char(void)690 console_read_char(void)
691 {
692 const uint32_t idx = get_cons_ops_index();
693 return cons_ops[idx].getc(true);
694 }
695
696 /**
697 * Attempt to read a character from the console, and if one isn't available,
698 * then return immediately.
699 *
700 * @return The character if one is available, -1 otherwise.
701 */
702 int
console_try_read_char(void)703 console_try_read_char(void)
704 {
705 const uint32_t idx = get_cons_ops_index();
706 return cons_ops[idx].getc(false);
707 }
708
709 #ifdef CONFIG_XNUPOST
710 static uint32_t cons_test_ops_count = 0;
711
712 /*
713 * Log to console by multiple methods - printf, unbuffered write, console_write()
714 */
715 static void
log_to_console_func(void * arg __unused,wait_result_t wres __unused)716 log_to_console_func(void * arg __unused, wait_result_t wres __unused)
717 {
718 uint64_t thread_id = current_thread()->thread_id;
719 char somedata[10] = "123456789";
720 for (int i = 0; i < 26; i++) {
721 os_atomic_inc(&cons_test_ops_count, relaxed);
722 printf(" thid: %llu printf iteration %d\n", thread_id, i);
723 console_write_unbuffered((char)('A' + i));
724 console_write_unbuffered('\n');
725 console_write((char *)somedata, sizeof(somedata));
726 delay(10);
727 }
728 printf("finished the log_to_console_func operations\n\n");
729 }
730
731 /* Test that outputting to the console can occur on multiple threads at the same time. */
732 kern_return_t
console_serial_parallel_log_tests(void)733 console_serial_parallel_log_tests(void)
734 {
735 thread_t thread;
736 kern_return_t kr;
737 cons_test_ops_count = 0;
738
739 kr = kernel_thread_start(log_to_console_func, NULL, &thread);
740 T_ASSERT_EQ_INT(kr, KERN_SUCCESS, "kernel_thread_start returned successfully");
741
742 delay(100);
743
744 log_to_console_func(NULL, 0);
745
746 /* wait until other thread has also finished */
747 while (cons_test_ops_count < 52) {
748 delay(1000);
749 }
750
751 thread_deallocate(thread);
752 T_LOG("parallel_logging tests is now complete. From this point forward we expect full lines\n");
753 return KERN_SUCCESS;
754 }
755
756 /* Basic serial test that prints serial output through various methods (printf/T_LOG). */
757 kern_return_t
console_serial_test(void)758 console_serial_test(void)
759 {
760 unsigned long i;
761 char buffer[CPU_CONS_BUF_SIZE];
762
763 T_LOG("Checking console_ring status.");
764 T_ASSERT_EQ_INT(console_ring.len, KERN_CONSOLE_RING_SIZE, "Console ring size is not correct.");
765
766 /* setup buffer to be chars */
767 for (i = 0; i < CPU_CONS_BUF_SIZE; i++) {
768 buffer[i] = (char)('0' + (i % 10));
769 }
770 buffer[CPU_CONS_BUF_SIZE - 1] = '\0';
771
772 T_LOG("Printing %d char string to serial one char at a time.", CPU_CONS_BUF_SIZE);
773 for (i = 0; i < CPU_CONS_BUF_SIZE; i++) {
774 printf("%c", buffer[i]);
775 }
776 printf("End\n");
777 T_LOG("Printing %d char string to serial as a whole", CPU_CONS_BUF_SIZE);
778 printf("%s\n", buffer);
779
780 T_LOG("Using console_write call repeatedly for 100 iterations");
781 for (i = 0; i < 100; i++) {
782 console_write(&buffer[0], 14);
783 if ((i % 6) == 0) {
784 printf("\n");
785 }
786 }
787 printf("\n");
788
789 T_LOG("Using T_LOG to print buffer %s", buffer);
790 return KERN_SUCCESS;
791 }
792 #endif
793