xref: /xnu-10063.121.3/bsd/net/kpi_protocol.h (revision 2c2f96dc2b9a4408a43d3150ae9c105355ca3daa)
1 /*
2  * Copyright (c) 2008-2016 Apple Inc. All rights reserved.
3  *
4  * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
5  *
6  * This file contains Original Code and/or Modifications of Original Code
7  * as defined in and that are subject to the Apple Public Source License
8  * Version 2.0 (the 'License'). You may not use this file except in
9  * compliance with the License. The rights granted to you under the License
10  * may not be used to create, or enable the creation or redistribution of,
11  * unlawful or unlicensed copies of an Apple operating system, or to
12  * circumvent, violate, or enable the circumvention or violation of, any
13  * terms of an Apple operating system software license agreement.
14  *
15  * Please obtain a copy of the License at
16  * http://www.opensource.apple.com/apsl/ and read it before using this file.
17  *
18  * The Original Code and all software distributed under the License are
19  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22  * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23  * Please see the License for the specific language governing rights and
24  * limitations under the License.
25  *
26  * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
27  */
28 /*!
29  *       @header kpi_protocol.h
30  *       This header defines an API to interact with protocols in the kernel.
31  *       The KPIs in this header file can be used to interact with protocols
32  *       that already exist in the stack. These KPIs can be used to support
33  *       existing protocols over media types that are not natively supported
34  *       in the kernel, such as ATM.
35  */
36 
37 #ifndef __KPI_PROTOCOL__
38 #define __KPI_PROTOCOL__
39 #include <sys/kernel_types.h>
40 #include <net/kpi_interface.h>
41 
42 #ifndef PRIVATE
43 #include <Availability.h>
44 #define __NKE_API_DEPRECATED __API_DEPRECATED("Network Kernel Extension KPI is deprecated", macos(10.4, 10.15.4))
45 #else
46 #define __NKE_API_DEPRECATED
47 #endif /* PRIVATE */
48 
49 __BEGIN_DECLS
50 
51 /******************************************************************************/
52 /* Protocol input/inject                                                      */
53 /******************************************************************************/
54 
55 #ifdef BSD_KERNEL_PRIVATE
56 /*!
57  *       @typedef protocol_input_handler
58  *       @discussion protocol_input_handler is called to input a packet. If
59  *               your protocol has specified a global lock, the lock will be held
60  *               when this funciton is called.
61  *       @pararm protocol The protocol this packet is intended for.
62  *       @param packet The packet that should be input.
63  */
64 typedef void (*proto_input_handler)(protocol_family_t protocol, mbuf_t packet);
65 
66 /*!
67  *       @typedef proto_input_detached_handler
68  *       @discussion proto_input_detached_handler is called to notify the
69  *               protocol that it has been detached. When this function is
70  *               called, the proto_input_handler will not be called again, making
71  *               it safe to unload.
72  *       @pararm protocol The protocol detached.
73  */
74 typedef void (*proto_input_detached_handler)(protocol_family_t protocol);
75 
76 /*!
77  *       @function proto_register_input
78  *       @discussion Allows the caller to specify the functions called when a
79  *               packet for a protocol is received.
80  *       @param protocol The protocol family these functions will receive
81  *               packets for.
82  *       @param input The function called when a packet is input.
83  *       @param chains Input function supports packet chains.
84  *       @result A errno error on failure.
85  */
86 extern errno_t proto_register_input(protocol_family_t protocol,
87     proto_input_handler input, proto_input_detached_handler detached,
88     int chains);
89 
90 /*!
91  *       @function proto_unregister_input
92  *       @discussion Allows the caller to unregister the input and inject
93  *               functions for a protocol. The input/inject functions may not be
94  *               unregistered immediately if there is a chance they are in use.
95  *               To notify the owner when the functions are no longer in use, the
96  *               proto_detached_handler function will be called. It is not safe
97  *               to unload until the proto_detached_handler is called.
98  *       @param protocol The protocol family these functions will receive
99  *               packets for.
100  */
101 extern void proto_unregister_input(protocol_family_t protocol);
102 #endif /* BSD_KERNEL_PRIVATE */
103 
104 /*!
105  *       @function proto_input
106  *       @discussion Inputs a packet on the specified protocol from the input
107  *               path.
108  *       @param protocol The protocol of the packet.
109  *       @param packet The first packet in a chain of packets to be input.
110  *       @result A errno error on failure. Unless proto_input returns zero,
111  *               the caller is responsible for freeing the mbuf.
112  */
113 extern errno_t proto_input(protocol_family_t protocol, mbuf_t packet)
114 __NKE_API_DEPRECATED;
115 
116 /*!
117  *       @function proto_inject
118  *       @discussion Injects a packet on the specified protocol from
119  *               anywhere. To avoid recursion, the protocol may need to queue the
120  *               packet to be handled later.
121  *       @param protocol The protocol of the packet.
122  *       @param packet The first packet in a chain of packets to be injected.
123  *       @result A errno error on failure. Unless proto_inject returns zero,
124  *               the caller is responsible for freeing the mbuf.
125  */
126 extern errno_t proto_inject(protocol_family_t protocol, mbuf_t packet)
127 __NKE_API_DEPRECATED;
128 
129 
130 /******************************************************************************/
131 /* Protocol plumbing                                                          */
132 /******************************************************************************/
133 
134 /*!
135  *       @typedef proto_plumb_handler
136  *       @discussion proto_plumb_handler is called to attach a protocol to an
137  *               interface. A typical protocol plumb function would fill out an
138  *               ifnet_attach_proto_param and call ifnet_attach_protocol.
139  *       @param ifp The interface the protocol should be attached to.
140  *       @param protocol The protocol that should be attached to the
141  *               interface.
142  *       @result
143  *               A non-zero value of the attach failed.
144  */
145 typedef errno_t (*proto_plumb_handler)(ifnet_t ifp, protocol_family_t protocol);
146 
147 /*!
148  *       @typedef proto_unplumb_handler
149  *       @discussion proto_unplumb_handler is called to detach a protocol
150  *               from an interface. A typical unplumb function would call
151  *               ifnet_detach_protocol and perform any necessary cleanup.
152  *       @param ifp The interface the protocol should be detached from.
153  *       @param protocol The protocol that should be detached from the
154  *               interface.
155  */
156 typedef void (*proto_unplumb_handler)(ifnet_t ifp, protocol_family_t protocol);
157 
158 /*!
159  *       @function proto_register_plumber
160  *       @discussion Allows the caller to specify the functions called when a
161  *               protocol is attached to an interface belonging to the specified
162  *               family and when that protocol is detached.
163  *       @param proto_fam The protocol family these plumbing functions will
164  *               handle.
165  *       @param if_fam The interface family these plumbing functions will
166  *               handle.
167  *       @param plumb The function to call to attach the protocol to an
168  *               interface.
169  *       @param unplumb The function to call to detach the protocol to an
170  *               interface, may be NULL in which case ifnet_detach_protocol will
171  *               be used to detach the protocol.
172  *       @result A non-zero value of the attach failed.
173  */
174 extern errno_t proto_register_plumber(protocol_family_t proto_fam,
175     ifnet_family_t if_fam, proto_plumb_handler plumb,
176     proto_unplumb_handler unplumb)
177 __NKE_API_DEPRECATED;
178 
179 /*!
180  *       @function proto_unregister_plumber
181  *       @discussion Unregisters a previously registered plumbing function.
182  *       @param proto_fam The protocol family these plumbing functions
183  *               handle.
184  *       @param if_fam The interface family these plumbing functions handle.
185  */
186 extern void proto_unregister_plumber(protocol_family_t proto_fam,
187     ifnet_family_t if_fam)
188 __NKE_API_DEPRECATED;
189 
190 #ifdef BSD_KERNEL_PRIVATE
191 /*
192  *       @function proto_plumb
193  *       @discussion Plumbs a protocol to an actual interface.  This will find
194  *               a registered protocol module and call its attach function.
195  *               The module will typically call dlil_attach_protocol() with the
196  *               appropriate parameters.
197  *       @param protocol_family The protocol family.
198  *       @param ifp The interface to plumb the protocol to.
199  *       @result 0: No error.
200  *               ENOENT: No module was registered.
201  *               Other: Error returned by the attach_proto function
202  */
203 extern errno_t proto_plumb(protocol_family_t protocol_family, ifnet_t ifp);
204 
205 /*
206  *       @function proto_unplumb
207  *       @discussion Unplumbs a protocol from an interface.  This will find
208  *               a registered protocol module and call its detach function.
209  *               The module will typically call dlil_detach_protocol() with
210  *               the appropriate parameters.  If no module is found, this
211  *               function will call dlil_detach_protocol directly().
212  *       @param protocol_family The protocol family.
213  *       @param ifp The interface to unplumb the protocol from.
214  *       @result 0: No error.
215  *               ENOENT: No module was registered.
216  *               Other: Error returned by the attach_proto function
217  */
218 extern errno_t proto_unplumb(protocol_family_t protocol_family, ifnet_t ifp);
219 
220 __private_extern__ void
221 proto_kpi_init(void);
222 
223 #endif /* BSD_KERNEL_PRIVATE */
224 __END_DECLS
225 
226 #undef __NKE_API_DEPRECATED
227 #endif /* __KPI_PROTOCOL__ */
228