1 /*
2 * Copyright (c) 2010-2012 Apple Inc. All rights reserved.
3 *
4 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
5 *
6 * This file contains Original Code and/or Modifications of Original Code
7 * as defined in and that are subject to the Apple Public Source License
8 * Version 2.0 (the 'License'). You may not use this file except in
9 * compliance with the License. The rights granted to you under the License
10 * may not be used to create, or enable the creation or redistribution of,
11 * unlawful or unlicensed copies of an Apple operating system, or to
12 * circumvent, violate, or enable the circumvention or violation of, any
13 * terms of an Apple operating system software license agreement.
14 *
15 * Please obtain a copy of the License at
16 * http://www.opensource.apple.com/apsl/ and read it before using this file.
17 *
18 * The Original Code and all software distributed under the License are
19 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23 * Please see the License for the specific language governing rights and
24 * limitations under the License.
25 *
26 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
27 */
28 #include <mach_debug.h>
29 #include <mach_ldebug.h>
30
31 #include <mach/kern_return.h>
32 #include <mach/mach_traps.h>
33 #include <mach/thread_status.h>
34 #include <mach/vm_param.h>
35
36 #include <kern/cpu_data.h>
37 #include <kern/mach_param.h>
38 #include <kern/task.h>
39 #include <kern/thread.h>
40 #include <kern/sched_prim.h>
41 #include <kern/misc_protos.h>
42 #include <kern/assert.h>
43 #include <kern/debug.h>
44 #include <kern/spl.h>
45 #include <kern/syscall_sw.h>
46 #include <ipc/ipc_port.h>
47 #include <vm/vm_kern.h>
48 #include <vm/pmap.h>
49
50 #include <i386/cpu_number.h>
51 #include <i386/eflags.h>
52 #include <i386/proc_reg.h>
53 #include <i386/tss.h>
54 #include <i386/user_ldt.h>
55 #include <i386/fpu.h>
56 #include <i386/machdep_call.h>
57 #include <i386/vmparam.h>
58 #include <i386/mp_desc.h>
59 #include <i386/misc_protos.h>
60 #include <i386/thread.h>
61 #include <i386/trap.h>
62 #include <i386/seg.h>
63 #include <mach/i386/syscall_sw.h>
64 #include <sys/syscall.h>
65 #include <sys/kdebug.h>
66 #include <sys/errno.h>
67 #include <../bsd/sys/sysent.h>
68
69
70 /*
71 * Duplicate parent state in child
72 * for U**X fork.
73 */
74 kern_return_t
machine_thread_dup(thread_t parent,thread_t child,__unused boolean_t is_corpse)75 machine_thread_dup(
76 thread_t parent,
77 thread_t child,
78 __unused boolean_t is_corpse
79 )
80 {
81 pcb_t parent_pcb = THREAD_TO_PCB(parent);
82 pcb_t child_pcb = THREAD_TO_PCB(child);
83
84 /*
85 * Copy over the x86_saved_state registers
86 */
87 if (thread_is_64bit_addr(parent)) {
88 bcopy(USER_REGS64(parent), USER_REGS64(child), sizeof(x86_saved_state64_t));
89 } else {
90 bcopy(USER_REGS32(parent), USER_REGS32(child), sizeof(x86_saved_state32_t));
91 }
92
93 /*
94 * Check to see if parent is using floating point
95 * and if so, copy the registers to the child
96 */
97 fpu_dup_fxstate(parent, child);
98
99 #ifdef MACH_BSD
100 /*
101 * Copy the parent's cthread id and USER_CTHREAD descriptor, if 32-bit.
102 */
103 child_pcb->cthread_self = parent_pcb->cthread_self;
104 if (!thread_is_64bit_addr(parent)) {
105 child_pcb->cthread_desc = parent_pcb->cthread_desc;
106 }
107
108 /*
109 * FIXME - should a user specified LDT, TSS and V86 info
110 * be duplicated as well?? - probably not.
111 */
112 // duplicate any use LDT entry that was set I think this is appropriate.
113 if (parent_pcb->uldt_selector != 0) {
114 child_pcb->uldt_selector = parent_pcb->uldt_selector;
115 child_pcb->uldt_desc = parent_pcb->uldt_desc;
116 }
117 #endif
118
119 return KERN_SUCCESS;
120 }
121
122 void thread_set_parent(thread_t parent, int pid);
123
124 void
thread_set_parent(thread_t parent,int pid)125 thread_set_parent(thread_t parent, int pid)
126 {
127 pal_register_cache_state(parent, DIRTY);
128
129 if (thread_is_64bit_addr(parent)) {
130 x86_saved_state64_t *iss64;
131
132 iss64 = USER_REGS64(parent);
133
134 iss64->rax = pid;
135 iss64->rdx = 0;
136 iss64->isf.rflags &= ~EFL_CF;
137 } else {
138 x86_saved_state32_t *iss32;
139
140 iss32 = USER_REGS32(parent);
141
142 iss32->eax = pid;
143 iss32->edx = 0;
144 iss32->efl &= ~EFL_CF;
145 }
146 }
147
148 /*
149 * thread_fast_set_cthread_self: Sets the machine kernel thread ID of the
150 * current thread to the given thread ID; fast version for 32-bit processes
151 *
152 * Parameters: self Thread ID to set
153 *
154 * Returns: 0 Success
155 * !0 Not success
156 */
157 kern_return_t
thread_fast_set_cthread_self(uint32_t self)158 thread_fast_set_cthread_self(uint32_t self)
159 {
160 machine_thread_set_tsd_base(current_thread(), self);
161 return USER_CTHREAD; /* N.B.: not a kern_return_t! */
162 }
163
164 /*
165 * thread_fast_set_cthread_self64: Sets the machine kernel thread ID of the
166 * current thread to the given thread ID; fast version for 64-bit processes
167 *
168 * Parameters: self Thread ID
169 *
170 * Returns: 0 Success
171 * !0 Not success
172 */
173 kern_return_t
thread_fast_set_cthread_self64(uint64_t self)174 thread_fast_set_cthread_self64(uint64_t self)
175 {
176 machine_thread_set_tsd_base(current_thread(), self);
177 return USER_CTHREAD; /* N.B.: not a kern_return_t! */
178 }
179
180 /*
181 * thread_set_user_ldt routine is the interface for the user level
182 * settable ldt entry feature. allowing a user to create arbitrary
183 * ldt entries seems to be too large of a security hole, so instead
184 * this mechanism is in place to allow user level processes to have
185 * an ldt entry that can be used in conjunction with the FS register.
186 *
187 * Swapping occurs inside the pcb.c file along with initialization
188 * when a thread is created. The basic functioning theory is that the
189 * pcb->uldt_selector variable will contain either 0 meaning the
190 * process has not set up any entry, or the selector to be used in
191 * the FS register. pcb->uldt_desc contains the actual descriptor the
192 * user has set up stored in machine usable ldt format.
193 *
194 * Currently one entry is shared by all threads (USER_SETTABLE), but
195 * this could be changed in the future by changing how this routine
196 * allocates the selector. There seems to be no real reason at this
197 * time to have this added feature, but in the future it might be
198 * needed.
199 *
200 * address is the linear address of the start of the data area size
201 * is the size in bytes of the area flags should always be set to 0
202 * for now. in the future it could be used to set R/W permisions or
203 * other functions. Currently the segment is created as a data segment
204 * up to 1 megabyte in size with full read/write permisions only.
205 *
206 * this call returns the segment selector or -1 if any error occurs
207 */
208 kern_return_t
thread_set_user_ldt(uint32_t address,uint32_t size,uint32_t flags)209 thread_set_user_ldt(uint32_t address, uint32_t size, uint32_t flags)
210 {
211 pcb_t pcb;
212 struct fake_descriptor temp;
213
214 if (flags != 0) {
215 return -1; // flags not supported
216 }
217 if (size > 0xFFFFF) {
218 return -1; // size too big, 1 meg is the limit
219 }
220 mp_disable_preemption();
221
222 // create a "fake" descriptor so we can use fix_desc()
223 // to build a real one...
224 // 32 bit default operation size
225 // standard read/write perms for a data segment
226 pcb = THREAD_TO_PCB(current_thread());
227 temp.offset = address;
228 temp.lim_or_seg = size;
229 temp.size_or_wdct = SZ_32;
230 temp.access = ACC_P | ACC_PL_U | ACC_DATA_W;
231
232 // turn this into a real descriptor
233 fix_desc(&temp, 1);
234
235 // set up our data in the pcb
236 pcb->uldt_desc = *(struct real_descriptor*)&temp;
237 pcb->uldt_selector = USER_SETTABLE; // set the selector value
238
239 // now set it up in the current table...
240 *ldt_desc_p(USER_SETTABLE) = *(struct real_descriptor*)&temp;
241
242 mp_enable_preemption();
243
244 return USER_SETTABLE;
245 }
246